Mainnet CHC uses CHCQ payout addresses. The Crypto Connection pool is independently operated. Get a Mainnet wallet

Mainnet · SHA-256d · independent pool

Mine Chipcoin with a Mining Pool

Step-by-step instructions for Linux and Windows. Start mining CHC on Mainnet without running your own full node.

Independent pool operator Crypto Connection graphics-card logo Crypto Connection Pool fee 1% · miner developer fee 0%

01 / Prepare

Before you start

You need an x86-64 Linux or Windows computer, internet access, a Mainnet CHCQ payout address, and compatible mining software. The address is public; your recovery phrase is not.

Get a Mainnet wallet

Create or restore a CHCQ address with a Mainnet-capable wallet. Check the selected network before copying the address.

Mainnet wallet setup

Pool vs. solo

Solo mining means finding a whole block yourself and normally requires your own node. In a pool, miners submit shares and the operator distributes rewards under its rules. This guide does not require your own full node.

Use the right network

Only Mainnet CHC can be paid from this Mainnet pool. Testnet CHC and its faucet are for testing and are not interchangeable with Mainnet funds.

02 / Install

Choose your operating system

These steps document Crypto Connection Miner v0.10.1, the upstream release that added CHC CPU mining on both platforms. If a newer release appears, check its notes, filenames, commands, and checksum before using it.

L

Linux · x86-64

CPU mining on Linux

  1. Check your computer. The official Linux x86-64 package requires glibc 2.34 or newer. CPU mining needs no NVIDIA GPU or driver. A supported NVIDIA card is optional for GPU mining, which uses a different command.
  2. Download the official archive. Open the v0.10.1 release and select its Linux x64 CUDA 12 .tar.gz asset. Verify the SHA-256 shown on that release; do not use a mirror.
  3. Extract it. Use your archive manager to extract the download into a new folder, for example ~/chc-miner. Open a terminal in the folder that contains crypto-connection-miner. If you instead build from source, follow the upstream README and its current dependency list; this guide uses the release binary.
  4. Set your payout address. Replace YOUR_CHCQ_ADDRESS below with your public Mainnet address. The optional .rig1 suffix names this worker.
  5. Start with one CPU thread. Copy the command, replace the placeholder, then run it in that folder.
bash · CPU · v0.10.1
./crypto-connection-miner --algo chc --cpu --threads 1 --pool crypto-connection.net:4093 --user YOUR_CHCQ_ADDRESS.rig1 --pass d=0.1

--threads 1 limits the miner to one CPU thread; increase it only if your computer can spare the load. --pass d=0.1 requests the pool's documented minimum fixed share difficulty; omit --pass to let the pool adjust difficulty. If Linux says “permission denied”, run chmod +x ./crypto-connection-miner in the extracted folder.

W

Windows 10/11 · x64

CPU mining on Windows

  1. Check your computer. The upstream v0.10.1 package supports Windows 10/11 x64. CPU mining works on x86-64 without an NVIDIA GPU or driver. NVIDIA GPU mining is optional and needs compatible hardware and current drivers.
  2. Download the official ZIP. From the v0.10.1 release, choose the Windows x64 CUDA 12 .zip asset. In PowerShell, use Get-FileHash to compare its SHA-256 with the release notes before running it.
  3. Extract all files. Right-click the ZIP, choose Extract All, and open the extracted folder. Keep the included files together. Open PowerShell in the folder containing crypto-connection-miner.exe.
  4. Set your payout address. Replace YOUR_CHCQ_ADDRESS in the command with your public Mainnet CHCQ address. The optional .rig1 suffix labels this PC.
  5. Start one CPU thread. Run the command below in PowerShell. Alternatively edit start_chipcoin_cpu.bat in the official package to set its ADDRESS value, then launch that file.
PowerShell · CPU · v0.10.1
.\crypto-connection-miner.exe --algo chc --cpu --threads 1 --pool crypto-connection.net:4093 --user YOUR_CHCQ_ADDRESS.rig1 --pass d=0.1

PowerShell requires .\ for an executable in the current folder. If the program does not start, confirm x64 Windows and that the whole official ZIP was extracted. Do not disable antivirus or Windows security globally; inspect warnings and verify the upstream checksum.

The project has independently confirmed Linux v0.10.1 against the CHC Stratum service. Windows CPU support and its executable are documented by the miner's upstream release, which reports accepted shares on the pool; this website has not independently run the Windows build.

03 / Reference

Pool configuration

Pool operatorCrypto Connection (independent; not an official Chipcoin service)
Stratum hostcrypto-connection.net
CHC port4093
Algorithm / PoWchc / Chipcoin's SHA-256d, interpreted big-endian
UsernameYOUR_CHCQ_ADDRESS.rig1 (worker suffix optional)
Pool / miner fees1% pool fee / 0% miner developer fee, as published by the operator
Payout schemePPLNS
Reported minimum payment10 CHC; confirm the current threshold with the pool operator before mining

Fee, payment threshold, pool availability and distribution rules are controlled by the third-party operator and can change. Check the current CHC pool page and operator FAQ.

04 / Check

How to tell whether mining works

Keep the miner window open for a few minutes. A connection alone does not mean you have earned CHC.

Connected

The miner reached the pool and received work. Check the host, port, internet connection and firewall if it cannot connect.

Share accepted

The pool accepted one unit of your work. This is the key early success signal, but not an immediate payment.

Share rejected

The pool did not credit that share. Check your CHCQ address, algorithm, difficulty, software version and clock/network stability. Repeated rejects are a problem.

Pool hashrate

The pool estimates your speed from recent accepted shares; its display can lag or fluctuate compared with the miner's local speed.

Block found

The pool found a valid block. Rewards still depend on maturity and the operator's PPLNS accounting.

Payment

A pending balance is not an on-chain payout. A completed payout has a transaction you can inspect in the Mainnet explorer.

Use the operator's CHC pool page for its live pool information. The operator's “My stats” tool may require your address; no address-specific direct stats URL is assumed here.

05 / Protect yourself

Mining uses a public address, never wallet secrets

  • Never enter a recovery phrase, private key, wallet file or wallet password into mining software or a pool website.
  • Download binaries only from the official upstream GitHub release and compare its published checksum.
  • Monitor temperature, power use and electricity cost. Mining may not be profitable.

Independent service

The pool and miner are maintained by third parties. Chipcoin does not operate the pool, control its payouts or guarantee availability, earnings or profitability.

Inspect miner source

Questions

Frequently asked questions

Do I need to run a full Chipcoin node?

No. The pool supplies work over Stratum. Solo mining is a different setup and normally requires your own node.

Do I need a wallet?

Yes. You need a Mainnet CHCQ address to receive any payout. The miner only needs that public address, not a private key.

Can I mine with a regular PC?

Yes, on a supported x86-64 Linux or Windows computer with the v0.10.1 --cpu mode. Results vary by hardware and electricity cost.

Can I mine with a GPU?

The upstream miner also documents CHC GPU mining on supported NVIDIA Maxwell-to-Blackwell cards. Omit --cpu for that separate mode and follow the current upstream GPU instructions. AMD GPU support for CHC is not documented here.

How long before I receive CHC?

There is no fixed wait. Shares must contribute to a pool-found block, the reward must mature, and your balance must satisfy the operator's payment rules. Accepted shares alone are not payments.

What does PPLNS mean?

Pay Per Last N Shares: the operator distributes a found block's reward according to recent credited shares, not as a payment for each accepted share.

Why is my pool hashrate different from the miner's?

Local hashrate measures your device's work; the pool estimates speed from shares received over a time window. Short windows fluctuate and can lag.

What if my shares are rejected?

Confirm --algo chc, the correct port, a Mainnet CHCQ address and the current official miner. Check connection stability and the displayed rejection reason. Do not use an ordinary Bitcoin SHA-256d miner: Chipcoin evaluates the digest differently.

Ready to begin?

Start small, verify shares, then scale carefully.

Download from upstream, mine with one CPU thread first and confirm accepted shares before increasing the load.